Pages

Jumat, 01 April 2016

MWA Review 1 Rough Cut Woodworking with Tommy Mac

A few months ago the founding administrators of the Modern Woodworkers Association were given the opportunity to review the new Rough Cut book from Taunton. It’s a companion to the first season of the TV show entitled “Rough Cut - Woodworking with Tommy Mac”.
The book dedicates a chapter to each of the season one projects with an additional chapter on finishing. It does a good job of walking readers through the projects and with a basic understanding of woodworking and the corresponding episode as a supplement most of the projects should be easily achievable.For our full review, please listen as four woodworkers banter on and on about actually having read a book.We’re working on setting it up in iTunes and we’ll update this as soon as we do. Until then, please listen here.Also, thanks to my fellow MWA Admins for making this happen.This post originally appeared at modernwoodworkersassociation.com
Read More..

MWA Podcast 44 Jeff Miller

This post originally appeared at modernwoodworkersassociation.com
Show Notes:
What’s in the shop?
  • Chris
    • Only used wood named after jungle creatures
  • Dyami
    • Carter Guides
    • The stool is blue & getting glossy
    • The Dyed Timberstrand Chris Mentioned
    • Tom
      • Tom’s wee bench
        • Last minute elf
        Blog post that piqued our interest
        • Nik Brown - The Digital Woodworker
          • A rustic bombproof farmhouse / harvest trestle table for a family kitchen
        • The Wood Whisperer
          • Scott’s Low-Back Chair
        • American Craftsman Workshop
          • and Fine Woodworking - It’s All Related
          Goings on in the MWA
          • Jim Heavey at Infinity cutting tools
          • Main topic
            • Jeff Miller
              • furnituremaking.com
              • Jeff has 7 benches, each outfitted differently
              • One of Jeff’s Books (Dyami’s favorite): Charimaking & Design
              Next broadcast’s topic (12/11/13)
              • Tom Fidgen
              • Fun Fact: Today (12/4/13) is Jim Ashley’s Birthday
                If you’re missing us already, you can subscribe to the show on itunes. Just search for the Modern Woodworkers Association. Once you’re subscribed, you’ll be sure never to miss an exciting episode. While you’re in iTunes, please leave us a 5 star rating. It helps our rank so others can more easily find us.
                If you want to find out more about the Modern Woodworkers Association, be sure to visit modernwoodworkersassociation.com, follow the MWA on twitter @MWA_National, like the MWA on Facebook or circle Modern Woodworkers Association on Google+. While you’re there, join the MWA Google+ community for project sharing, discussion and loads of woodworking banter.
                Dont forget about the +Modern Woodworkers Association Podcast. We talk woodworking with Guests from around the world of woodworking every other week. Subscribe to the RSS feed or iTunes today.
                Read More..

On Milling


Though I know better, I ended up with this seriously warped side panel for the steps I’m making for my son.
Its got a wee bit of cupping.
Convention holds – and I agree – that there are two (2) good methods for milling.
The best method is to perform you initial milling and get pieces close – but not all the choice – to size. Then give them a few days to sit and re-acclimate. They will cup and twist some as the newly exposed surfaces acclimate. You can then remove the cupping and twisting when you do your final milling to exact size just before assembly.
The not quite as good but still usually acceptable method is to start milling and take the piece right to exact final dimensions. Then assembly immediately, before anything can warp or twist.
Alas, I did not heed either of these strategies. I was simply working as much and as fast as I could during the limited time I had. This meant that on Saturday I milled pieces from start to their final, exact dimensions. Because of the 2x10 stock I was using, this involved taking ½” off the face of the boards. Then I put them achoice for the night.
On Saturday night I found them to still be very (if not perfectly) flat. I cut pins in the top of my side pieces and then glued them up.
On Monday night I entered the shop to find one of my steps severely cupped. Then I unclamped the sides and found that one of them was severely cupped also.
At least the table saw is flat. The top step? Not so much.
I’m hoping that I can fight them to flat with my Woodpeckersaluminum cauls and then force the step stool together without too much trouble. If that doesn’t work I’ll try cutting a slot or two in the inside face, clamping it flat and filling the slots with epoxy. As a final resort I can cut the two (2) pieces apart, re-flatten and re-glue.
Whichever method works, I’ve given myself more work and probably compromised the level of quality for the finished piece. Next time I’ll try to slow myself down and save time by milling properly.
Dont forget about the +Modern Woodworkers Association Podcast. We talk woodworking with Guests from around the world of woodworking every other week. Subscribe to the RSS feed or iTunes today.
Read More..

Wall Mounted Ships Clocks

Wow its been nearly two months since my last blog post! Will anyone still be reading this?
While I have been back home from my yacht delivery for a few weeks, I have been busy building a new wooden garden fence and spending my time with Bible study. Finally, the other day the lure of the tools enticed me back to my wood working room to build something. Nothing complicated, just something quick and dirty to get me started again.
A simple bevel edged board to wall mount my beloved ships clock & barometer. These little treasures of mine have been with me on all my sailings, including three single handed Atlantic crossings, so they mean a lot to me. It will be nice to still enjoy them now Im a land lubber.
Anychoice, Im back - I havent forgotten the blog and there will be more small projects to come, I promise.
Read More..

The Ply Wooden Boat Part II Planning Materials

The boat they made on GardenFork.tv, which I was using as the basis for my design, was made of a single sheet of plywood. It was about 24” wide with sides about 12” high. Though Eric from GardenFork.tv is a trim guy, his narrow boat road very low in the water when he launched it as a solo passenger. As I wanted to be able to take my kids (and even other adults) in the boat with me, I decided I would need two (2) sheets of plywood.
With this as a plan, I headed straight to Lowes once we were settled in at Lake George (and I was back from the trip to Fine Woodworking Live I made immediately after arriving).
Yep, thats what a boat looks like before its put in the water.
Since the ¼” luan I used on the mock boat was awfully damn thin, and the plywood bottom would need to support me, I opted to use ?” CDX plywood. Though it was bowed and coarsely textured as most CDX is, I felt it provided me the best mix of strength, weight and cost. For the battens, I chose to switch to 2”x2”, so the tips of the screws wouldn’t poke through the ¾” thickness of the 1”x used in the mock boat. I also bought some 2”x4”, metal saw horse brackets and a small drop cloth so I could work at a comfortable height and keep the mess in check.
Ready for ripping!
In the parking lot, I had to rip down the 4’x8’ sheets of plywood before they would fit inside my truck. This being upstate New York, there was no problem woodworking in the parking lot.More (Ply)Wood Boat Posts.
Read More..

OK so I totally lied yesterday

I said yesterday that I would finish up the poly on the table when I returned from SEMA.  I couldnt help myself and put on the first coat of poly about a quarter to midnight last night.  I checked it this morning and it is definitely going to need a good sanding before I put on the next coat.
?
Read More..

Bench Stop

Many times just a simple stop is all needed for planing straight-ahead. It is fast and has the advantage of  avoiding distortions in the piece closed between the vise and dogs, especially in the case of reduced thickness. It is not difficult to build one cutting a through mortise (1"x 1 1/2"ca.) in which a plunger slides; its section is very close to section of mortise and  its long enough to be easily adjusted by a wing nut screw system placed under the bench. One shown in the photo is the glorious Record 169, easy to fit in any work bench.
Read More..