Pages

Senin, 28 Maret 2016

Dylans Frame

On Saturday, my son is displaying in an art show at the Central Park Zoo. One of his pieces is a large coloring on canvas. In order to display the coloring I was assigned building him a frame.
Can you see the frame yet?
I’ve enjoyed using the rough sawn lumber I picked up from +Kari Hultman last summer on my last few projects, so I began the frame build by heading to the attic and selecting a large slab. I’m not sure what type of wood it is. Once milled, it’s a nice blond color with a mild grain pattern.
To make the frame, I broke the slab into three (3) pieces with my jigsaw and then joined and planed them flat. Though I only planed them until all three (3) were flat and parallel, they ended up being exactly 1” thick when I was done. Once I had ripped them to width, I used my Incra Miter 1000 SE to cut the miters. I call it out so specifically not to brag about it, but to complain. I find the flip stop annoying to use and the face of the fence is not plum, resulting in the leading edge of the work lifting when it is held or pushed against the fence. I had problems with my miters, and I believe this is why. Finally, I cut the rabbet for the picture with two (2) passed on the table saw.
The dreaded 1000 SE (the burning is because the blade desperately needs to be cleaned).
After everything was cut, I set a domino in each miter and glued up the frame. This was the first time I’d used the framing blocks for my parallel clamps. I was pleasantly surprised by how well they worked.
My sloppy miters.
To address the gaps in the miters, I used wood putty mixed with rasp shavings. I decided that rasps would be the quickest choice to make the pile of dust I needed. Unfortunately, I decided that a coarse rasp would make the dust quicker, so I used the coarse side of my Shinto rasp. The Shinto rasps leave shavings closer to what you’d get off a jointer than to saw dust. These big shavings didn’t mix very well and some didn’t even fit in the gaps at the miters. Even after puttying the miters aren’t perfect. I’ll probably use a wax stick to fill in the remaining small gaps once I’m done with the finish.
I followed +Marc Spagnuolo’s Simple Varnish Finish instructions and finished the frame with 5 coats of General Finishes Arm-R-Seal. The final coat still needs to be buffed out, but it looks good.
Once the finish is done, all that’s left is to mount the hanging hardware and set the picture inside. Then it’ll be off to Central Park for the Art Show. My Son’s coloring will certainly be the star, but I wouldn’t mind if the frame gets a little affection too.Read More..

New Yankee Workshop Workbench Leveling and tray installation

I made the bench feet with some scrap 2x4 that I had leftover.  This turned out to be a bad idea because it made the bench really wobbly.  I cut some new feet out of some 3/4" stock and then shimmed 2 of them and the bench is solid as a rock now.  I also screwed in the side boards and the tool tray.  My should vise screw also came in the mail so it is time to make the tailstock!
I flipped the bench over so I could work on the feet.
I removed the feet one at a time so I could use the old ones as a template for drilling out the screw holes in the same place.
I used a stop block on my mitre saw to make the 2 1/2" squares.
Old foot and new foot for comparison.
I used a cereal box to make some shims.
One foot took 3 shims and the one diagonally across took 2.
The center of the log board going down the length of the tool tray was slightly bowing so I screwed in a small support.
I screwed the tray down first and then screwed the side into the support.
Here it is ready for the tailstock and bench screw.
Speaking of bench screws!
I picked this one up at leevalley.com for about $38 including shipping.
?
Read More..

Project video posted! Build 2 small crates out of a single 2x4

After all this fun it was time to go home. I’m already counting the days to Woodworking In America 2014.Dont forget about the +Modern Woodworkers Association Podcast. We talk woodworking with Guests from around the world of woodworking every other week. Subscribe to the RSS feed or iTunes today.
Read More..

Blurry In The Shop Too Many Projects To Focus

Ive got too many projects open right now, and I cant seem to focus.
The frame - mid finishing - during a dry run of fitting the picture.
Sheathing . . . finally.
The shop itself has been an open project since the fall of 2008 when I tore out the garage. Ive been actively working on the shop since returning from Woodworking in America 2011. In that time Ive managed to super insulate the walls (R-40), run the new wiring and sheath with 3/4" OSB. With the installation of outlets, Im closing in on a functional space.
This tree house isnt going to finish itself.
As the shop puts me in a honey do deficit, I also have the requisite family project going on. Since last summer Ive been working on a tree house for my kids. At this point its fully framed and sheathed. I just need to roof it, deck it and build a ladder. As the weather is breaking and the kids are ever anxious for their tree house, this is probably where most of my time will go for the foreseeable future.
Some day, this will hold a glue gun.
Currently on my bench there is a half finished glue gun rack. Its made of walnut with ebony accents as most glue gun racks are. Its a design as I go project. While this method usually works for me, the design process for this project isnt holding my attention and the rack is beginning to stall.
Some day, this is going to be an ass kicking bench.
The bench itself is another open project. Im still using a Whiteside bench I bought off Craigs List many years ago. In 2011 I began working on my Clockwork Bench. Ive gotten as far as rounding up my vise hardware (and having it custom milled). Ive also picked up the lumber for the bench.Its waiting patiently in my attic.
Also in my arrive is a chair my Aunt & Uncle have asked me to fix. Its a relatively generic piece of commercially made oak furniture. I need to make a missing arm and reattach a loose one. Luckilly, Ive been told by my uncle that the shape of the new arm doesnt need to be perfect, just the color & tone of the finish.
Those five (5) projects are probably enough to keep me busy through the end of 2013. Yet, its not the glue gun rack or my bench details that Ive been sketching lately. Ive been scribbling achoice on chair designs like mad over the last few week. I’ve got a sinking suspicion that this sixth project may end up being the first one finished.
Read More..

This weeks WWMM video

I dont think this is something that I would ever make but it is really cool to see the process that he used to make the bent wood.  I definitely want to try that some day.
Read More..

Documenting my DeWalt DWP611PK


Today I was asked a question on twitter. Kenny Comeaux asked me to recommend a trim router. Apparently, as I have as many routers as I do fingers (no, I’ve not cut any off), I’ve picked up a bit of a reputation as a router expect. Kenny’s timing was perfect, as tonight was the first time I used my new DeWalt DWP611PK trim router kit. I’m happy to share my opinion, and I figured here was the best place to do so.
The DWP611PK Trim Router Kit
What’s so cool about the DWP611PK?The DWP611PK is a revolutionary trim router kit unlike any other trim router (sister company Porter-Cable has a DWP611PK clone). The revolutionary feature of the DeWalt is that it’s a standard fixed base / plunge base combo, only with a trim router motor. Also, and this would have been a deal killer for me had it gone the other choice, there are reasonably priced dust shrouds for both the fixed and plunge bases.
The fixed base dust shroud.
Initial ImpressionsWhen I opened up the DWP611PK I was impressed. Though I’ve handled the fixed base model at Home Depot & Lowes, opening my kit was the first time I’d held the plunge base. I found that both bases are solid and well balanced. The plunge base is smooth and easily operated. The clear baseplates on both bases combine with the two (2) built in LEDs to provide excellent visibility. I find this very important, as a lack of visibility due to the solid baseplates on some of my other routers is a big complaint of mine.
I didnt actually route the rabbet with the DWP611PK, I used the little
DeWalt to route out the original rounded edges (penciled in in the photo)
I left when I initially undercut the rabbet with my bigger OF1400.
Adjustment MeansMy first, and arguably most versatile, router was a Porter-Cable 690 series. For as long as I’ve used it, I’ve never liked the adjustment mechanism of rotating the motor to bring it up or down. This requires unplugging it from the D-handle in order to rotate it, and when using the router against a reference surface, it has the potential of moving the bit relative to the reference surface if the motor and base are not perfectly round and centered.While the DWP611PK appears to have the same type of adjustment mechanism, DeWalt has vastly improved it. They have milled a vertical groove up the side of the threaded motor body and added a free-spinning threaded collar to the base. This results in a motor that does not spin, but only goes up and down. In use, you spin the threaded collar and the motor moves, guided by pins which ride in the vertical groove. I found this movement to be smooth and very easy to adjust.
A close up of the adjustment collar on the fixed base. The yellow ring is
free spinning and can reference any potion of the black ring. Rotating
the black ring moves the motor smoothly up and down within the base.
The plunge base is very well done, in a rather standard choice. The release lever is spring loaded and easily reached by the left hand without removing the hand from the grip. There are five (5) turrets on the rotating stop and the stop bar on the body adjusts easily and has a sliding indicator bar for measuring depth movement. It is a standard plunge but funtional and well done nonetheless.
The 5 position (4 fixed, 1 adjustable) turret stop on the plunge base.
In useOnce I had a ¼” upspiral bit chucked in the motor and the motor set in the plunge base, I went to connect my vacuum. I have a Festool CT22, a fairly ubiquitous dust extractor which I’ve had success connecting to most of my hand power tools (Festool or not). When I tried to connect the CT22’s hose to the DeWalt dust shroud, I was initially pleased that it fit the inner fitting of the shroud. Unfortunately, I soon realized that the outer fitting prevented the hose from making enough contact with the inner fitting to remain connected. I assume that the outer fitting is there to allow hoses of different diameters to be used. Unfortunately, it only prevented me from connecting with my preferred hose. After rooting around in the attic for a bit, I was able to come up with a Shop Vac hose end that fit the DeWalt dust shroud. Though this arrangement was slightly awkward, it stayed attached and worked fine. I’ll ultimately cut off the outer fittings to allow use of the Festool hose, but that’s a project for another day.
Little router, large vacuum hose connection.
Once it was hooked up, I only used the DWP611PK in the plunge base and only for a few minutes, but I found it wonderful to use. It’s my first trim router, and it’s just what I wanted in a trim router. It’s lightweight, maneuverable, had great visibility and is quiet. In a matter of a minute I was able to enlarge the corners of the inner rabbets for my frame to address my initial under cutting.Am I glad I bought the DWP611PK?Yes. Though the dust shroud connection issue was a strike against the DeWalt, it was fairly easy to overcome and it’s not a deal killer. The DWP611PK is a versatile, well balanced trim router for a very reasonable price (especially from Amazon). When I consider it against many of the other routers I own, I know the DWP611PK will see lots of use in my shop. It will probably see lots of use in yours too.
Read More..