Pages

Sabtu, 02 April 2016

Cold Turkey

Due to family matters I am currently in France achoice from my workshop and tools. Aside from swinging the odd axe and hatchet for the log burner, I have been a completely woodworking free zone for three weeks!!! 
However ... with lots of free time to spare I have been doing a lot of internet reading and learning! The new buzzwords floating around my head are Timber Frames & Green Oak, and Chainsaw Milling. Objects of desire now include such things as Robert Sorby 1, 1.5 & 2 inch chisels and 2 & 3 inch Slicks. Gransfors Bruks Draw Knives and Froes, and Wetterlings  Axes.
God Makes Work for Idle Hands.... Ill be back home real soon and I have a lot of catching up to do!
Read More..

Dougs Clamp Rack

A few weeks ago I made it up to my Dad’s shop in Greenwich, NY. He’s still setting up the shop and working on finding homes for all of the tools he moved up from Long Island in the aftermath of Tropical Storm Sandy. While I was working with him I set up a new Very Super Cool Tools table saw fence (which I’ll post about shortly), cut about 40 drawer bottoms on the table saw, dadoed for the drawer bottoms in the sides, front and back of the drawers and finished a new clamp rack.
My Dads shop during a visit I made over the summer.
The clamp rack is a fairly basic design which he first intended to be a temporary solution to get the clamps off the floor. He assumed that he’d live with it for a while and then make a permanent one from better materials and of a design refined by use.
This initial clamp stand is fairly simple. It’s a box made of ¾” CDX plywood. It rests on a base of plywood that has a dimensional lumber lip for stability and four casters underneath for mobility. There is one half shelf and one full shelf. So far half the base holds heavy duty pipe clamps and the half shelf holds wooden handscrews. He hasn’t figured out what to put on the top shelf.
A view of the clamp rack showing the side, base, half shelf and shelf.
Inside the clamp rack, there the half shelf is missing there are racks running down each side. These racks hold his F-Style clamps.
The racks for the F-Style clamps are deep to accommodate the handles.
They dont have ends so that the clamps can be slid, rather than lifted, out.
On one exterior side is a Woodpecker Heavy Duty Clamp Rack filled with K-Body parallel clamps. The other exterior side is lined with shop made racks of my own design which hold Irwin Quick-Grip clamps. There’s also a half-length rack on that side for the shorter Quick-Grips.
This side holds the Quick-Grip clamps.
These racks were quick to make and the head of the clamp fits in easily.
This was a quick and rewarding project that has helped clean up the shop and made finding and reaching clamps much easier. Though it’s barely been used, my Dad is already regretting not having made of better wood as he thinks this could be the final design.
The finished clamp rack.
How do you store your clamps?
Read More..

First WorkBench

The Chicken & The Egg Workbench Conundrum...
As its been sunny lately and the room I intend to use isnt quite ready, I have been using a scrap piece of kitchen worktop placed on the garden table as a makeshift bench to clean & sharpen up my tools.
I was considering using the same piece of worktop and maybe knocking together some rough saw horses for it to go across as a slightly more rigid bench solution. However, it seems I would still be wrestling with clamps holding more clamps to hold a work piece. While Im sure its doable its far from ideal - much like previously living on a boat!
I could try and build a bench myself, but lets face it with my skills and no other bench to build it on, Im not sure its going to be any better than the saw horse solution.
Therefore, after much deliberation and reading, I have decided that the best thing (for me) is to buy a beginner bench.
This bench at only £126 seems pretty cheap and despite a few poor reviews must be more sturdy than the other solutions, especially if I can butt it up against a wall. It includes two vices and other work holding devices. I dont think I could build anything better for the price.
A friend introduced me to Axminster Tools and it took less than 5 minutes to sign up and pay for this little beauty, with free next day delivery! While I dont expect it will be as solid or rigid as a professional bench, for the price I dont think it can be beaten as a beginner bench. If the woodworking bug really takes hold then obviously Id like to build my own full size bench at some stage but by then I would know what Im doing (hopefully) and probably wouldnt be working out of a tiny spare room.
Read More..

I started a new project a Lego travel case!

My older sons birthday is next month and my wife suggested that I make him a travel case for his Legos.  I bought him 5 lbs of Legos last year for his birthday and 2 lbs the year before that.  He also has around 10 smaller kits that have all been assimilated into his collection.  I had originally planned to use scraps of cedar fence post left over from the planter build but upon closer inspection that are all warped or twisted in some choice so I went to Lowes and picked up some 1/2" poplar boards.  I started the glue up last night and plan on working on it some more tomorrow.  I have been vlogging about it on my YouTube channel and you can check it out here:  http://www.youtube.com/funwithwoodworking
?
Read More..

That Giant Sucking Crushing Sound Part II

Once my metal chip bin met with crushing failure, I immediately scrapped it and set about re-building the dust collection bin. I first looked into buying a metal 55 gallon drum, but found them to be prohibitively expensive. I then found a plastic 55 gallon drum that had seen better days and was suffering from a cracked edge. As the bin was plastic I was able to simply cut off the cracked top section with my jig saw. After the cut I was left with a workable +/- 48 gallon drum with a gaping hole at its top.
rough fitting the mounted top section.
In order to mount the Dust Deputy to the plastic drum I initially thought of making a round lid out of MDF that would rest on the top of the drum and be sealed with weather stripping. In order to do this, I began flattening the cut edge of the drum. I then flattened it some more, and some more after that. Then I ran out of patience. It dawned on me that if I made a new top for the drum out of sheet goods, I could permanently mount and seal that to the drum and then cut a removable top sized to perfectly fit the mounted one. In order to make the mounted and removable tops exactly the same size I screwed them together and then cut them to size on the table saw as a single piece. Being lazy, I made the top square, rather then cut of the corners to make it a space savings octagon. I attached a lip of 3/4" baltic birch plywood scraps around the edge of the removable top to better gasket them and chamfered the inside edge of the lip to make tops easier to set on one another.
I rubbed in and let the glue on the cleats on the mounted base dry before
flipping the unit over and screwing into them. 
In order to mount the mounted top I glued and screwed cleats to the top. I used a jig saw to cut the middle of the mounted to out and then screwed the plastic drum to the cleats. I sealed the screws and the drum to the mounted top with M-1, a fantastic sealant we use at work.
The mounted top, sealed to the plastic drum.
I was at this stage in the construction when I heard that MDF was porous and might not provide an air tight top. To combat this, I sealed the top surface of the mounted top and the bottom surface of the removable top with shellac. If this doesnt prove to be enough Ill glue an EPDM gasket to the mounted top.
The completed Dust Deputy setup.
With the top mounted and air sealed (hopefully) it was quick work to install the Dust Deputy and previously built elbow assembly. I connected the CT22 and turned the knob all the choice to the rabbit. It sucked and sucked and didnt crush.
The wheels make it so much easier to move.
As a final convenience I mounted castors to the bottom and handles on the side of the plastic drum. This lets me easily move it around the shop and will hopefully let me easily empty it (though I fear its emptying frequency will be based more on weight than on capacity).
Now my shop sucks with the best of them. How does your shop suck?
That Giant Sucking (& Crushing) Sound - Part I
Read More..

2012 Resolutions

I am still achoice from home and my tools until next week. Therefore, aside from lots of reading, I have been thinking about the New Year ahead and how it relates to my personal wood working aspirations...
So ... My wood working New Years Resolutions, Aspirations, Hopes & Goals for 2012.
  • Take my quality of working to the next level.
  • Attend at least one (1 week)  wood working course.
  • Improve my finishing skills (including patience).
  • Work with more hard woods.
  • Have the confidence to try more complicated & challenging joinery.
  • Work on longer term larger projects.
  • Sell some of the things I make.
Id be really interested in other peoples goals for the year ahead especially those beginners like myself.
Happy New Year Everyone!..
Read More..

Lets make a thumb chair

There are several woodworking sites that I follow on Facebook and one of them is Ana Whites.  She runs a DIY blog and gives out plenty of free plans that she sketches.  A couple of weeks ago she posted a plan for a thumb chair that you can find HERE.  Once I saw it I knew that it would be perfect for my two boys.  It can be made out of 1x3s and some 1x12.  My local Home Depot never has flat 1x12s so I picked up some 1x6s and will be gluing them up for the seat bottom & back.
This is the example from her blog.
I set the angle for 10 degrees
and the bevel for 5 degrees
Here is the mitre saw all set up and ready to cut
I am making 2 chairs and I set up a stop block to make sure all the
legs are the same length.  I almost reset the saw to the other side to cut the other
half of the legs when I realized that you can flip and then turn them over to get the
opposite side.
Make sure that the bevel leans into the center of the chair when you
connect the pieces.
I drilled pockety holes into the cross pieces for the legs and the stretchers
that connect the two leg assemblies.
This Kreg clamp is a life saver.  I have a real problem with the wood shifting
when I drill in the pockets holes and making the pieces uneven.
It wasnt in the plans but I used a 1/4" roundover bit on my router table
to ease over the sides of the legs and bottom of the crosspieces.  I left the top
and bottoms flat.  The top of the legs is at a 5 degree bevel but the crosspiece
is not so I had to be careful when I attached them to keep the high point to
the outside.
I also rounded over the bottom of the stretchers.
I used my Rockler mini clamp-it to get the strectchers in the right
place and angle for gluing and screwing.
Its alchoices good to have a helper.
I marked the two pieces to make them easier to line up.
One side done.
I test fitted it before applying glue.
One of my legs shifted a little so its not quite square but
it sits flat on the ground so I am not going to complain.
Im halfchoice done with the first chair.
?This is post 1 of a 3 part series.
You can read part 2 here:
2013/02/thumb-chair-update.html
and part 3 here:
2013/02/the-first-thumb-chair-is-done.html
Read More..