Pages

Kamis, 31 Maret 2016

Look its a new episode of WWMM!

You can see all of the 2013 Shop Tour Videos here.
Read More..

N?1 Spiers Dovetail Plane

This post has written by Vittorio Thinking of metal planes I often think to Stewart Spiers
I like much the side profile and handles, so I searched for a model; I found it on the Handplane Central website, so I adapted the draw for a 2 inches blade and tried to building the plane.
I used Fe 430 steel bars (5x70mm) for sole and sides, joined the two sides in three points by countersunk screws (in this choice the screws do not interfere while the pieces are clamped in the vice) and cut the tails.
  The mouth is opened by boring it with a 3 mm tip, hack saw blade and a 2,5 mm file. I obtained two angles, one of 47° (seat angle) and the other of 45° (wear angle).
The blade support (47°) is fixed by 3 iron rivets (dia. 6,5 mm)
The sole is prepared for jointing and the classical Spiers profile is cut. Beautiful but a little bit laborious.
Sanding by 80 grit abrasive paper (sides are screwed to a piece of wood)
During the tail peening, if joints are precise, 2 mm of extra length are enough, otherwise 3 mm are necessary for closing all gaps. 
Lever cap: I could not imitate the original because had not a model; however the job was acceptable for me.
The chipbreaker showed some rusted areas, so I sanded it (80 and 120 grit) and created the profile for a good adherence to blade at cutting edge.
The Sorby blade is 2" wide parallel iron (from e-bay); 25° bevel, 30° microbevel.
The cap iron screw (M8, 16 mm head) was built by welding together a rectangular nut with a screwed rod. 
Bun and handle are ash wood, stained and treated with shellac. Read More..

Jointing Fence

Squaring board edges is one of the typical job for traditional woodworking hand planes where they show their effectiveness. Stanley produced the famous but rare 386 as help  to be applied on side of jointer planes.
Of course best  modern plane makers offer similar solutions. I recently found myself having to do the squaring job on long fir boards,  using the new Stanley 62, a low angle plane with the length of a jack which reproduces the historical N° 62. It is not a jointer but the low-angle configuration offers advantages in softwood planing. The sides are very low, not allowing the anchoring of traditional guides. That required a self-built solution. So I made a simple guide with a beech  board (composed of several pieces assembled for greater stability), reproducing in the upper portion the shape of the  plane and leaving a protrusion from the bottom of the plane of about 7 cm.
Another removable piece, anchored to the main board, covers one of external parts to the mouth ; so,  when you join the guide to the work piece you are within the cutting area of plane. This piece could  be replaced in special situations with a shaped board in order to have a different angle than 90 degrees. The  
 anchorage system consists of two L-plates with a central pivot to create a very effective third type lever in wich the grip is guaranteed by rubber interposed between the plate and the plane.
During processing, the main strength  is carried laterally to held the fence tightly in contact with the board. The knob is used to improve lateral handling. And here it is at work.
Read More..

Brooklyn Welcomes Lie Nielsen

This weekend the Lie-Nielsen Hand Tool Events are coming to Brooklyn. Theyll be at 3rd Ward (195 Morgan Ave, Brooklyn, NY 11237) on Friday, 1/4, from 10:00 to 6:00 and on Saturday, 1/5, from 10:00 to 5:00.
Tools for Working Wood will be there, and theyll be open.
In addition to their own wonderful wares, Lie-Nielsen will be bring some top notch tool makers to Brooklyn with them. Daed Toolworks, M.S. Bickford, Guarino Furniture Designs, Northwest Woodworking Studio & Tools For Working Wood will be at 3rd Ward too. In fact, rumor has it +Matthew Kenney (of +Fine Woodworking) will be there too.
What a pretty view in Brooklyn.
Im going to try to make it on Friday afternoon, but dont wait for me. Check out the show (and say hi to Matt).
3rd Ward